Product Care
LAUNDERING
Washing Instructions
Washing instructions are printed on a white tag inside our garments. Following our garment care instructions will help make sure that your gear has a long, interesting life. In general, washing your gear in cold or warm water with mild laundry soap (non-toxic, biodegradable types preferred) and drying it on the line are the best ways to clean Patagonia® products.
Dry Cleaning
Given the rumpled nature of the road trips that inspire so much of our gear, Patagonia doesn’t make anything that requires dry cleaning. Our clothes are made to be worn and washed with very little fuss. More importantly, the EPA estimates that 85% of the dry cleaners in America use perchloroethylene, or “perc,” to clean garments and textile products. This chemical solvent has significant human and environmental risks. We make clothes that wear and perform beautifully without all that.
Fabric Softeners and Dryer Sheets
Generally, we don’t recommend using fabric conditioners or softeners on our products. Adding fabric softener or dryer sheets to your laundering process can increase softness but it achieves the improved hand feel by depositing waxy agents on the surface of the fabric. This waxy residue left behind on your clothes may: impair moisture wicking and quick-dry fabrics from doing their job; inhibit odor control; reduce the longevity of spandex; and worst of all, stop your DWR from performing its job.
Ironing
In general, Patagonia garments do not require ironing. However, if you’re trying to make a good impression on “the parents” and you want to sharpen the crease down the front of your pants after an afternoon of bouldering, you should check the iron symbol on the care label of your garment first to make sure it can be safely ironed. If the iron symbol has a line through it, don’t iron. The dots on the label correspond to how much heat you should use—fewer dots mean less heat.
Drying
Line dry your clothing whenever possible. Turn bright or dark items inside out to reduce fading, including jeans. Hang shirts from the bottom, and pants and skirts from the waistband so the clothespin marks are in a less conspicuous spot. Line drying saves energy and reduces environmental impact.
For some items you will need to use a dryer to get maximum performance out of your gear. Drying waterproof/breathable fabrics on a medium/warm setting will help to renew the fabric’s durable water repellent (DWR) finish, which keeps the outer fabric from becoming saturated in wet conditions. If you want to get the highest loft and coziness out of your down pieces, check out Down Cleaning/Down Care section below.
Microfiber Pollution Prevention: Fiber Filters
Putting your synthetic clothing into a filter bag before washing by hand or machine can significantly reduce the flow of microfibers into your drain. Another option is a permanent washing machine filter (requires some plumbing expertise). Make sure you clean out your filter after a few washes when you can visually see that fibres have collected. Wipe the fibres out with your finger and put the fibres in your trash bin.
Down Cleaning/Down Care
Use a down-specific detergent and follow the directions on the bottle. Traditional detergent can strip down of its natural oils and negatively affect the loft and performance. Do not use fabric softener or bleach.
A front-loading washing machine is preferred, though a top-loader will work just fine on a hand-wash or delicate setting.
Down items will have better loft, which directly equates to better performance (keeping you warm), if you use a dryer on low heat rather than line drying. To help break up clumps and redistribute the down, include 2 clean tennis balls or a large heavy-cotton bath towel in the dryer. Be patient, it will take a few dryer cycles to be completely dry and lump-free.
DWR Revival
Most waterproof/breathable shells on the market are treated with a Durable Water-Repellant finish (DWR) which keeps the outer fabric from becoming saturated so the breathable barrier can do its job of keeping you comfy and dry.
Remember, a clean shell is a happy shell. Be sure to wash your waterproof/breathable garments and regularly replenish their water-repellent coating. Drying waterproof/breathable fabrics on a medium/warm setting will help to renew the fabric’s durable water repellent (DWR) finish.
After many adventures and washings, your waterproof/breathable garment will require more than a simple washing and drying to revive the DWR finish. When water no longer beads up on the garment, it’s time to turn to a spray-on solution which you can find at our store under the Product Care & Repair page.
Waders
A thorough rinse with fresh water after each outing is essential. Putting your wading gear away wet or not rinsing with fresh water can lead to damaging mold growth and eventual degradation of the fabric. Similarly, high heat and moisture can cause irreparable damage, so please don’t leave wet waders in a hot car over the weekend.
We engineer all Patagonia waders and wading pants to be easily machine-washed and dried. It’s a good practice to wash your waders before they start looking dirty or smelling less-than-fresh. We recommend washing and drying after fishing different drainages, as this limits the transfer of invasive species between waterways. Before storing for an extended period, wash and dry waders.
Proper care symbols are printed in all our waders. Here are some helpful instructions:
We suggest machine washing separately in cold water with a mild detergent in an agitator-less washing machine for regular cleaning of dirt and body oils. Open zippers and pockets for the most thorough clean. If using a washing machine with a center agitator, be sure to use the delicate cycle. After draining, follow with a low-heat tumble dry cycle, which helps kill invasives.
Begin the dry cycle with the waders inside-out, and then reverse once the linings of the booties feel dry. Finish with a low-heat tumble dry, and you’re all set!
To freshen and to help break the alkaline bond that comes from fishing brackish water, 1/4 cup of distilled white vinegar can be substituted for the mild detergent in the above process. Vinegar also helps remove invasive species and strips away body odour retention that arises from detergent buildup.
Do not bleach, iron, dry clean, or use fabric softeners.
Fish hard, fish often, and fish clean.
Wading Boots
Here are some tips on how to extend the life of your boots and keep you on the water longer for seasons of good fishing.
For non-leather wading boots, the most essential cleaning step is to brush away debris and rinse with fresh water after every outing. When fishing brackish water, it can be helpful to spray distilled white vinegar on the surface of the boots to break the chemical bond these alkaline waters create. Follow with a freshwater rinse. Ensure the boots are completely dry before storing and store in a dry location. Keeping wet boots in a hot car for an extended time can lead to damage and sole separation. Products like Barge Cement or Shoe Goo can be useful to re-glue a separated sole.
It is also important to brush away debris and rinse with fresh water after each day on the water for leather wading boots. Using a soft- or medium bristle brush or a clean shop rag should be enough to loosen dirt, mud, and sand. Remove insoles and rinse, then thoroughly drain the boots.
To dry leather wading boots, feel free to use a boot dryer—the low heat and slow movement of dry air are best for overnight drying. Alternatively, rolled newsprint can also gently absorb moisture—change rolls until dry, then recycle. Never dry your boots directly near an intense heat source (i.e., fire, a hairdryer, direct sunlight, or next to a space heater).
Condition full-grain leather boots when the leather starts to look dried-out, or every 3-6 months. Please remember, leather is not indestructible; improper care will cause it to harden and crack. Leather consistently getting wet and drying out will speed this up without regular conditioning. Conditioning is easy and usually takes a few minutes for each boot. Using your hands or a soft rag, coat the leather in a water- or silicone-based conditioner. If you notice a buildup of conditioner around stitching or hardware, use a cotton swab to remove the excess. Let them sit overnight to allow the conditioner to soak in, then use a soft rag to wipe off excess. If you are using a water repellent, make sure to apply this after the conditioner, but not until your boots are completely dry.
The leather in Patagonia wading boots is treated to be waterproof but can lose effectiveness over time. Waterproof your boots 2-3 times per year; the Danner Waterproofing Spray or Gel are recommended.
Wetsuit Washing and Repair Guide
We’ve spent years developing and field testing Patagonia Wetsuits to assure a good balance of performance and durability. But no wetsuit lasts forever. Proper care will maximize your suit’s life expectancy.
Rinse your wetsuit with fresh water and hang-dry it inside out after every session. Do not dry or store in direct sun. Avoid folding to prevent creases. If you need to wash your wetsuit, we recommend washing by hand with a wetsuit-specific cleaner. We use and suggest Pau Pilau Biological Wetsuit Cleaner; Dr. Bronner’s liquid soaps are good too. Never use a washing machine, dryer, dry cleaner or bleach.
STAIN REMOVAL GUIDES
Alcohol and Dish Soap
A grease-cutting liquid dishwashing detergent can be used for a multitude of stain removal applications: spot cleaning tough stains, removing grease spots and more.
Isopropyl alcohol (rubbing alcohol) is a great degreasing agent that works best as a spot cleaner and removes tough surface oils that soap or detergent cannot.
Most of your adventure mishaps can be treated and cleaned with just these two items!
Berries
One of the rewards of alpine bouldering is picking delicious berries along the way. Remove berry stains by soaking the stained garment in white vinegar or lemon juice for 5 minutes. Rinse thoroughly with cool water. Machine wash as normal.
Blood
If possible, immediately rinse blood stains from fabric with cold water. Follow the rinse with an extended soak in cold salt water. Do not use hot water; hot water will set stain permanently. If the blood has dried, try soaking the garment in a solution of ammonia and water before washing as directed by the garment care tag. Use an inconspicuous area of the fabric to test for colour fade before applying to the stain.
Butter
Great on toast, not on clothes. And remember, your toast will always fall butter side down! There are a couple of different approaches to tackle greasy, oily stains. Remove all excess butter and treat with a grease-cutting dishwashing detergent. Launder as usual. You can also make a paste of powdered laundry detergent and water. Rub the paste on the stain, let it sit for 30 minutes and wash as directed.
Chocolate
Chocolate goes well with most anything (we think it tastes best after a long, untracked powder run), but not with clothing. Start by scraping away as much of the stain as possible. A grease-cutting liquid dishwashing detergent mixed with water can be used to gently remove the remaining residue. Finish by washing the garment with warm soapy water.
Coffee
Whether you’re working in the shop or commuting on your bike every morning, there’s a good chance you and your clothes will come into contact with some type of grease.
Luckily, grease comes out of fabrics quite easily. Spot-treat the area by using a grease-cutting liquid dish washing soap. This treatment will usually remove the stain. Launder as usual.
Gum
If you find yourself on the losing end of a bubble gum blowing contest, freeze the gum until it hardens, then scrape it from the fabric. If necessary, use some rubbing alcohol to remove the stain. Then wash as directed.
Ink
Ink wants to stay put, so don’t be discouraged if your first attempts to remove it are unsuccessful. Try blotting (not rubbing) the stain gently with a cotton ball or clean cotton cloth dampened with a few drops of rubbing alcohol (this may take several tries). Test the alcohol first on an inconspicuous part of the garment and allow the fabric to dry. If there’s no discolouration, wet a second cotton ball and blot the stain, but do not saturate the fabric. Allow to dry. Using a toothbrush, clean the stain with a drop of dishwashing detergent and scrub until the stain has disappeared. Wash and dry per the garment care instructions.
Pine Sap
Have you hugged a tree today? If so, rejoice—and read on. To remove the pine sap, use an ice cube to freeze the area until it’s completely frozen. Scrape off any remaining residue. Use a cloth soaked in rubbing alcohol to remove the stain, then rinse with cold water. If the stain persists, try spot treating it with some liquid detergent. Let it soak for 5 minutes, then follow the washing instructions. Don’t dry your item until all the sap is removed.
Red Wine
As quickly as possible, apply a solution of 3 parts hydrogen peroxide to 1 part liquid dish soap. Blot with a clean dry cloth to lift the stain and continue until the stain disappears. Do not rub, as this will set the stain. Once the stain is out, launder per the garment care label. If the stain doesn't come out, open another bottle!
FABRIC CARE
Cotton
Wash your organic cotton gear in cool-to-warm water with mild laundry detergent (non-toxic, biodegradable types preferred) and dry it on the line if possible. You may also use a dryer on the low-heat setting. When in doubt, read the clothing care label on your garment.
GORE-TEX® and H2No® Fabrics
Waterproof/breathable fabrics from GORE and Patagonia will provide years of optimal performance if kept clean and free from dirt, sunscreen and oils from your skin.
Machine-wash waterproof/breathable garments in warm water (86˚F/30˚C) using a ‘technical wash’ specifically formulated for waterproof/breathable garments.
If you don’t have a technical wash solution in your laundry room, you can use a biodegradable fragrance-free, dye-free detergent. If you are using a standard detergent, be sure to give the jacket an extra rinse cycle to ensure a residue-free garment.
Drying waterproof/breathable fabrics on a medium/warm setting will help to renew the fabric’s durable water repellent (DWR) finish, which keeps the outer fabric from becoming saturated in wet conditions. This step will keep you comfortable longer.
After many adventures and washings, your waterproof/breathable garment will require more than a simple washing and drying to revive the DWR finish. When water no longer beads up on the garment, it’s time to turn to a spray-on solution which you can find at your favourite outdoor gear shop.
Hemp
Wash any garment made from hemp in cold or warm water with mild laundry detergent (non-toxic biodegradable types preferred) and dry it on a clothesline if possible. You may also use a dryer on a low heat setting. When in doubt, read the clothing care label on your garment.
Merino Wool Baselayer
Merino’s natural odour-resistant properties allow you to wear your garment multiple times between washings (ideal for road trips). That said, when even your dog refuses to share your sleeping bag, machine wash your merino baselayer in cold water. We recommend washing your merino garment with Grangers Merino Wool Wash then tumble drying at low temperature—or laying it flat on a dry towel to save energy and reduce environmental impact.
PrimaLoft® Insulation
Machine wash your Primaloft® garment with a mild detergent on a gentle cold-water cycle. Tumble dry on low or line dry.
Recycled Polyester
Machine wash polyester in warm water on the “permanent press” setting. Use a mild laundry detergent (nontoxic biodegradable types preferred) and dry it on a clothesline if possible. You may also use a dryer on a low heat setting, just make sure to remove it from the dryer immediately to prevent wrinkling.
To remove stains from polyester, try a few drops of dishwashing liquid directly on the stain and rub until the stain starts to lift. Rinse thoroughly with clean water.
Recycled Nylon
Machine wash your recycled nylon garment in cool-to-warm water with a mild laundry detergent (non-toxic biodegradable types preferred). Line dry or tumble dry on low heat